 |
| Intex 42" |
|
|
- Coated steel frame
- Hi-impact plastic steps
- Sturdy base with flared feet
- For use 42" wall height pools
$79.99
|
 |
| Confer |
|
|
- Fits 48" to 54" aboveground pools:Adjustability is made by simply moving side braces up or down depending on pool height.
- Heavy duty construction: Unique one piece handrail/leg design will hold 300lbs.
- Five evenly spaced steps make climbing the ladder easier:
Most other adjustable ladders increase the space between the bottom step and the next step when installed in a 53" or 54" pool.
- Outer steps swing up and lock into upright position:
Some building inspectors now require this instead of a lift-off ladder section.
- No sand required; just fill with water to prevent floating. Most other ladders use a bag filled with sand.
- Converts to an inpool ladder with optional CK100 Kit: Just cut ladder to desired length.
- Two tone color: white and grey: Complements today's pools
- # 7000-EXT Extension kit available for 56" tall pools.
- Features an anti-entrapment barrier
- Weight guideline: 300 lbs.
| Part # |
Description |
Price |
| 7000B |
A-frame ladder |
$199.99 |
|
 |
| Confer |
|
|
- Aesthetically pleasing contemporary design in beautiful warm gray color
- Large 5 inch x 18 inch wide Comfortreads
- Curved side rails designed with strength in mind
- Inner side rails include integrated side barriers to prevent entry behind the ladder
- Easy assembly with minimal hardware
- Adjusts to fit pools 48” to 56” tall
- Lockable Roll-Guard Barrier (lock included)
- Extra large top platform
- Just fill side rails with water to prevent floating, no sand or bricks needed
- Fits pool top seats up to 14 inches wide
| Part # |
Description |
Price |
| 7200 |
Roll top a-frame ladder |
$229.99 |
|
 |
| Confer |
|
|
Deluxe heavy-duty in-pool ladder
Totally adjustable for deck heights from 46" to 56"
5" x 18" wide
Flat treads for easier climbing
Includes deck platform
White side rails with grey treads for high visibility.
No sand required.
Features an anti-entrapment barrier
Optional #6000-EXT Extension Kit available to extend ladder to approximately 68 inches
Weight guideline: 300 lbs.
| Part # |
Description |
Price |
| 6000B |
Deck down ladder |
$129.99 |
|
 |
| SR Smith |
|
|
-
Made from beautiful stainless steel for a classic look
-
stainless steel tread
-
Rubber bumpers are fitted to the ends to protect where the ladder meets the side of the pool
-
Tubing 1.90" OD with 6" radius bends
-
Available in 3 or 4 tread
| Part # |
Description |
Price |
| VLLS-103S |
3 tread |
$229.99 |
| VLLS-104S |
4 tread |
$329.99 |
|
 |
| Confer |
|
| * For above ground pools with flat bottoms. * Easy, snap together installation * Large, flat steps (each with 270 square inches) complete with two all-plastic handrails * Mounting brackets included; secures unit to pool or deck * Side openings allow water circulation behind unit to inhibit algae growth * Gray steps for high visibility in water * Economical, yet strong; holds 400 pounds. * Improved base system
| Part # |
Description |
Price |
| STEP-1 |
Above ground in-pool step |
$229.99 |
|
 |
| Access Resin |
|
| * For above ground pools with flat bottom or steep drain slope *White aluminum hand rails *Twice the water circulation *Comes with space for optional light *Spacer for 52" or 54" pools *500# Weight capacity
| Part # |
Description |
Price |
| STEP-2 |
Above ground step |
$389.99 |
| STEP-2 & 9045-W |
Above ground step with led light option |
$539.98 |
| 9045-W |
LED light only(for existing steps) |
$149.99 |
|
 |
| Vinyl Works |
|
|
*For above ground pools *Handrails and steps go inside and outside of pool for easy climbing *Full gate that is self closing, self latching, and lockable
| Part # |
Description |
Price |
| VKS/2000 |
Stairkit with gate |
$599.99 |
|
 |
| Access Resin |
|
| *For in ground pools *Stainless Steel grab rails *Step with non-slip surface texture *Maximum weight capacity 500 lbs.
| Part # |
Description |
Price |
| ANB/INGROUND |
In ground steps with 2 handrails |
$649.99 |
|
|